Points of Interest:

• Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
• Designed individually to suit the Ranger, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
• Our drawer systems are not designed to be continually exposed to the weather, they should only be fitted to a utility with a canopy or some permanent cover fitted.
• Four holes must be drilled through the tray to fit this drawer system.
• We have a drawer system designed to suit a Ranger with or without a tray liner.

Full drawer system (two drawers "side by side") $2700 + options, half drawer system (one drawer) $1350 + options.
The internal dimensions for each drawer with tray liner are: 1555mm (L) 427mm (W) 235mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)
The internal dimensions for each drawer without tray liner are: 1655mm (L) 440mm (W) 245mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)