Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
Designed
individually to suit the Colorado, neatly following the contours of the vehicle.
Our drawers are designed to utilise all the space available.
Our
drawer systems are not designed to be continually exposed to the weather, they
should only be fitted to a utility with a canopy or some permanent cover fitted.
Four
holes must be drilled through the tray to fit this drawer system.
This
drawer system is designed to suit a Rodeo without a tray liner.
Full
drawer system Crew Cab (two drawers "side
by side") $2300 + options,
half drawer system (one drawer) $1150 + options.
Full drawer system Space Cab (two drawers "side
by side") $2700 + options,
half drawer system (one drawer) $1350 + options.
Open drawer system Crew Cab - $1870. Internal dimensions
for the drawer 1310mm(L) 875mm(W) 250mm (H).
The internal
dimensions for each drawer for the Crew Cab are: 1275mm(L) 415mm(W)
208mm (H) (These measurements are for our standard size drawer system. The height
of each drawer can be changed to suit the customer)
The internal dimensions
for each drawer for the Space Cab are: 1695mm(L) 435mm(W) 208mm
(H) (These measurements are for our standard size drawer system. The height of
each drawer can be changed to suit the customer)
