Low Profile Centre Roof Consoles from $390

Click here for prices of accessories and options.

Points of Interest:

• Robust construction - Suitably durable for off road driving. Manufactured from steel and hardwood plywood - NO PLASTIC.
• The shape of the base of the console can be custom made to suit the customer’s radio(s) and other requirements.
• Radio holes and storage openings etc. cut to suit your requirements and accessories.
• Designed for maximum headroom without interfering with the sunvisors or any other functions of the vehicle.
• Upholstered in a vinyl or velour finish to match the vehicle's interior.
• A vacuum formed finish is also available for this roof console. This is a foam backed, heat shrunk, one wrap (no seams) finish similar to the finish on the dashboard. Click here for prices.
• Fits the vehicle without drilling any holes by utilising the rear view mirror (sunvisor screws in the RA model) and interior light mounting screw holes. The interior light then re-mounts into a pre cut hole in the console.
• Some Rodeos have a genuine map light fitted, this can be fitted to our console if required.
• Designed so the radio curly cords are out of view.
• We manufacture our consoles in weekly batches. If we receive an order by Monday 5:30pm Sydney time your console will be dispatched on the following Friday. The dispatch date can vary if there is a public holiday.
• Professional fitting service available.
  
  
  Your centre roof console will be designed to suit your specific model vehicle. It will neatly follow the contours of your hoodlining and will be the ideal width to suit the distance between your sunvisors. The length of the console takes into account the mounting system for the console, the shape of the cabin and when applicable, headroom for the rear seat passengers. When calculating the depth of the console we allow for maximum headroom and a clear view for the rear vision mirror. As no two model vehicles are the same our "vehicle specific" consoles are the best available.
  
  In addition to being "vehicle specific" we also "custom build" each console to suit your requirements - nobody else does that! We adjust the shape of the base of the console to suit your radio(s) storage or lighting requirements. When custom building your console we can build a slim line console for maximum headroom or a deeper console for maximum storage. We can make the console's radio housing(s) as small as your radio(s) will allow providing more headroom and moving your radio(s) closer to the windscreen for better access. Another advantage of this versatility of design, most modern radios have a LCD (liquid crystal display) screen. It is easier to read the LCD when you are looking square onto the screen. Whenever possible, we change the angle on the console's facia panel to suit the radio being fitted.

Below are some sketches to show you some of the possible variations available for centre roof consoles.

MICROPHONE CURLY CORD RETAINER

A piece of "one wrap" hook and loop tape is supplied with each roof console (one retainer for each radio) to prevent your microphone curly cord from dangling and blocking your view. Simply screw this retainer onto the console in a suitable position between the radio and the microphone clip, then wrap the tape around the curly cord. If you need the full length of the curly cord, the "one wrap" tape is easy to release and re-attach.