-
Our storage drawers
have been designed to be as strong and as light as possible.
This is achieved by constructing the drawers from marine
bonded plywood then re-enforcing any areas that are highly
stressed with steel components. Some parts are glued screwed
and braced, other parts are riveted or bolted together.
Click
here for more
information on the construction.
-
Designed
individually to suit the iLoad, neatly following the contours
of the vehicle. Our drawers are designed to utilise all
the space available.
- The
rear door opening drawers are fitted by utilising the "tie
down" captive nuts. Two holes must be drilled through
the floor to fit a side door drawer.
-
Access
is provided to the bolt that releases the spare wheel.
- Available
to suit a vehicle with or without a genuine cargo barrier.
Full drawer system (two drawers "side
by side" - rear door) $2700 + options.
The internal dimensions for each drawer are: 1480mm(L) 495mm(W)
305mm (H) (These measurements are for our standard size drawer
system. The height of each drawer can be changed to suit the
customer)
Single drawer system (one drawer - opens from
side door) $1150 + options.
The internal dimensions for each drawer are: 1335mm(L) 607mm(W)
305mm (H) (These measurements are for our standard size drawer
system. The height of each drawer can be changed to suit the
customer)