• Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
• Designed individually to suit the iMax, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
• Fits the vehicle without drilling any holes by utilising five of the "tie down" captive nuts.
• Access is provided to the bolt that releases the spare wheel by way of an access hole (with cap) in the passenger's side drawer (see photo). The tool supplied with the vehicle to release the spare wheel cannot be used when the drawer system is fitted. A 21mm socket, ratchet and 150mm extension bar will do the job.
• This drawer system does not interfere with the floor mounted air vents that are positioned behind the middle row seat.

Full drawer system (standard height) (two drawers "side by side") $2220 + options, half drawer system (one drawer) $1110 + options.

The internal dimensions for each drawer are: 1240mm(L) 498mm(W) 242mm (H). (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer).