Points
of Interest:
- Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
-
Designed
individually to suit the Sprinter, neatly following the contours of the vehicle.
Our drawers are designed to utilise all the space available.
-
If
required, a full Ausgaurd cargo barrier can be fitted in front of this system.
- We
have templates to build a full drawer system (one or two drawers) that opens through
the rear door and/or a single drawer that opens through the side door (see photos).
- When fitting this drawer system, holes must be drilled through the floor.
Full
drawer system (two drawers "side
by side" - rear door) $2700 + options.
The internal dimensions for each drawer are: 1392mm(L) 527mm(W) 275mm (H)
(These measurements are for our standard size drawer system. The height of each
drawer can be changed to suit the customer)
Single
drawer system (one drawer - opens from side door) $1450
+ options.
The internal dimensions for each drawer are: 1447mm(L) 838mm(W) 266mm (H)
(These measurements are for our standard size drawer system. The height of each
drawer can be changed to suit the customer) |
