Points of Interest:

• Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
• Designed individually to suit the Navara, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
• Our drawer systems are not designed to be continually exposed to the weather, they should only be fitted to a utility with a canopy or some permanent cover fitted.
• Four holes must be drilled through the tray to fit this drawer system.
• The drawer system is designed to suit a Navara without a tray liner.

Full drawer system (two drawers "side by side") $2700 + options.
The internal dimensions for each drawer are: 1725mm(L) 464mm(W) 244mm (H). (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer).

Half drawer system (one drawers) $1350 + options.
The internal dimensions for each drawer are: 1725mm(L) 464mm(W) 244mm (H). (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer).

Open drawer system (one drawer) $2250 + options.
The internal dimensions for each drawer are: 1760mm(L) 983mm(W) 250mm (H). (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer).