|
Points of Interest:
- Robust construction - Suitably durable for off road driving.
- The shape of the base of the console can be custom made to suit the customer’s radio(s) and other requirements.
- Radio
holes and storage openings etc. cut to suit your requirements
and accessories.
- Designed for maximum headroom without interfering with the sunvisors or any other functions of the vehicle.
- Upholstered in a vinyl or velour finish to match the vehicle's interior.
- A vacuum formed finish is also available for this roof console. This is a foam backed, heat shrunk, one wrap (no seams) finish similar to the finish on the dashboard.
- Fits the vehicle without drilling any holes by utilising the rear view mirror and interior light mounting screw holes. The interior light then re-mounts into a pre cut hole in the console.
- Designed so the radio curly cords are out of view.
- We
manufacture our consoles in weekly batches. If we receive an order by Monday 5:30pm
Sydney time your console will be dispatched on the following Friday. The dispatch
date can vary if there is a public holiday.
- Professional fitting service available.
MICROPHONE
CURLY CORD RETAINER
A
piece of "one wrap" hook and loop tape is supplied
with each roof console (one retainer for each radio) to prevent
your microphone curly cord from dangling and blocking your
view. Simply screw this retainer onto the console in a suitable
position between the radio and the microphone clip, then wrap
the tape around the curly cord. If you need the full length
of the curly cord, the "one wrap" tape is easy to
release and re-attach.
|
