|
FITTING INSTRUCTIONS:
Step 1. Remove the sunvisors,
the rear view mirror and the front hood lining.
Step 2. Run the wiring for your console accessories
and radio(s).
Step 3. If required, attach a replacment foam backed
velour or carpet front hood lining directly onto the steel
turret.
Step 4. The console is designed to sit on top of the
steel channels above the doors. Place the console in position
above the door channels. Connect the wiring to the radios
etc.
Step 5. Push the console forward until the front of
the console is sitting underneath the steel channel above
the windscreen.Drill four 1/8" dia holes into the windscreen
channel in line with the four holes in the console.Fix the
console into position using the four 40mm self tapping screws
provided in the "console fitting kit". Cover the
heads of these screws with the snap caps provided.
Step 6. Attach the sunvisors onto the base of the console
using the four 20mm self tapping screws in the "console
fitting kit". Four nuts have been provided to act as
spacers between the console and the sunvisor mounting feet.
Step 7. Re-attach the rear vision mirror.
|
