Department of the interior, Department of the Car Interior, Console Supplies, 4wd Storage Drawers, Storage Drawers, car interiors, centre roof console, custom built console, floor console, roof console, overhead console, 4wd shelf
         
Asia Motors
Hino
International
Kia
Lada Niva
Landrover
Mack
MG
Morris
Oka Motors
Peugeot
Porsche
Renault
Rocsta
Saab
Ssangyong

Subaru

Suzuki
Toyota
UD
Volkswagen


       

 

You are in Products -> Landrover -> Range Rover Classic 3/'94 to 2/'95 incl. -> Cargo Storage Drawers

The following information is specifically for the Range Rover. See Storage Drawers for Cargo Areas for detailed information. See features, optional extras, and how our drawers are constructed so that they are stronger and lighter.

Why buy our drawers?
Above: The Vouge and Vouge LSE models have a genuine CD stacker mounted under the brake evaporative loss container (inside the driver's side parcel tray support). To gain access to this stacker, we cut a hole in the side of our drawer system. As shown in this photograph, to access the stacker just pull out the driver's side drawer and the driver's side fridge slide.
Above and Below: This drawer system has been designed to suit a Range Rover with the passenger's side spare wheel trim cover (ie the "parcel tray support") and the spare wheel removed. The customer will need to find an alternative place to keep the spare wheel. If the drawer system was designed to butt up to the passenger's side parcel tray support, it would be impossible to remove the spare wheel. There is a very large storage area created by removing of the wheel and parcel tray support. Removal of the parcel tray support leaves part of the body exposed. We supply a piece of carpet to cover this exposed area.


Points of Interest:

  • Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
  • Designed individually to suit the Range Rover, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
  • If required, a full Milford cargo barrier can be fitted in front of this system.
  • Fits to the vehicle by utilising four of the luggage tie down captive nuts in the cargo area.
  • To install our Range Rover full drawer system, the passenger's side trim panel must be removed and the spare wheel must be re-located. If the vehicle has the genuine CD stacker fitted, we recomment a drawer system with a driver's side fridge slide. To access the stacker, slide out the driver's side drawer and the fridge slide.
To install our Range Rover full drawer system the passenger's side trim panel must be removed and the spare wheel must be re-located. If the vehicle has the genuine CD stacker fitted, we recommend a drawer system with a driver's side fridge slide. To access the CD stacker, slide out the driver's side drawer and the fridge slide. Full drawer system (two drawers "side by side") $2220 + options (price code FCDT01500). Half drawer system (one drawer) $1110 + options (price code HCDT01500). The internal dimensions for each drawer are: 774mm(L) 440mm(W) 210mm(H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)