Points
of Interest: -
Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
-
Designed
individually to suit the APV, neatly following the contours of the vehicle.
Our drawers are designed to utilise all the space available.
-
Four holes need to be drilled through the floor to fit this drawer system.
-
The
drawer system is designed to butt up to a non genuine 2nd row seat. The length of the drawer system can be altered if required.
Full
drawer system (two drawers "side
by side") $2220 + options
The internal dimensions for each drawer are: 1135mm(L) 385mm(W) 306mm
(H).
(These measurements are for our standard size drawer system. The height
of each drawer can be changed to suit the customer).
Full
drawer system (one drawer) $2220 + options
The internal dimensions for the drawer are: 1135mm(L) 862mm(W) 300mm
(H).
(These measurements are for our standard size drawer system. The height
of the drawer can be changed to suit the customer).
Half
drawer system (one drawer) $1110 + options
The internal dimensions for the drawer are: 1135mm(L) 385mm(W) 306mm
(H).
(These measurements are for our standard size drawer system. The height
of the drawer can be changed to suit the customer).
Open
drawer system (one drawer) $1790 + options
The internal dimensions for the drawer are: 1170mm(L) 725mm(W) 250mm(H).
(These measurements are for our standard size drawer system. The height
of the drawer can be changed to suit the customer).
| 
