Across Windscreen Full Facia Roof Console from $390

Click here for prices of accessories and options.

FITTING INSTRUCTIONS:

Step 1. Remove sunvisors and rear vision mirror.

Step 2. There is a recess cut on each side of the console base to accept the two steel brackets supplied. Using a pencil, mark where each recess lines up with the channels above the doors. Remove the console, attach the steel brackets to the channel using the 12mm screws supplied. Re-fit the console and bend the brackets under the console. Screw the brackets to the console using the 25mm screws supplied.

The tapered bracket supplied attaches to the vehicle using the genuine rear vision mirror mounting screws. The bracket then bends back under the console. Fix the bracket to the console with the two 20mm 12 gauge screws supplied. Then cover the bracket by re-mounting the mirror under the console with the two 25mm 10 gauge screws.

Step 3. Re-mount the sun visors onto the base of the console with the four 10 gauge screws supplied. Attach the driver's side visor on the passenger's side and visa versa. You must bend the rod that holds the visor in place so that the visor will sit flat on the base of the console.

A piece of "one wrap" hook and loop tape is supplied with each roof console (one retainer for each radio) to prevent your microphone curly cord from dangling and blocking your view. Simply screw this retainer onto the console in a suitable position between the radio and the microphone clip, then wrap the tape around the curly cord. If you need the full length of the curly cord, the "one wrap" tape is easy to release and re-attach.