Car Consoles & 4WD Storage Drawers - Department of the Interior - overhead consoles, roof consoles, custom built consoles, 4WD interiors, storage systems, vehicle consoles, radio console, dashboard pod, four wheel drive.

You are in Products -> Toyota -> Landcruiser 76 Series Stationwagon-> Centre Floor Compartments

Compartment with plain facia $495

Compartment with two can holders $559

Compartment with deep pocket in facia $550

Click here for prices of accessories and options.

Points of interest:

• The versatile flat facia panel can house radio(s), can holders, a shallow tray or a deep pocket.
• Available in a large range of colours. The most popular - dark grey.
• Comes complete with a storage bin and a hinged padded lid. The storage bin is upholstered on the inside and includes a removable lining that is held in place by Velcro tape. (click here for more information)
• Designed to neatly fit the floorpan.
• This compartment can be built with a round front or a flat front. The flat front is designed to butt up to our floor tray (see photo) - the flat compartment and the “U” tray are only available for the early model 76 Series with the steel dashboard (i.e. built date to and including June 2009).
• This console is recessed on the driver's side to fit around the handbrake.
• Robust construction - strong enough to sit on. Manufactured from steel and hardwood plywood - NO PLASTIC.
• Installation is quick and easy, fitting instructions and a fitting kit are included.
• We manufacture our consoles in weekly batches. If we receive an order by Monday 5:30pm Sydney time your console will be dispatched on the following Friday. The dispatch date can vary if there is a public holiday.
• Professional fitting service available.

This photo shows a compartment that has been designed to butt up to a "U" shaped floor tray. Suits 76 Series to and including June 2009.

Fitting Instructions:

Step 1. Remove the genuine floor compartment.

Step 2. One of the mounting points for the genuine floor compartment is a “U” shaped bracket. This bracket must be modified before fitting the custom built compartment. As shown in photo No. 1, each side of this bracket can be folded down so it does not obstruct the compartment.

Photo 1

Photo 2

Step 3. The anchor for the second row seat holding strap must be turned on a different angle before fitting the compartment (see photo No. 2).

Step 4. Remove the Velcro mounted lining from inside the compartment.

Step 5. Sit the compartment in position, so that the base of the console is a perfect fit, following the contours of the floorpan. Centre compartment between the seats.

Step 6. Drill two 9/64” diameter holes into the floorpan in line with the hole in each of the two angle brackets attached to the console.

Step 7. Attach the console to the floor using the two 25mm self tapping screws in the fitting kit.

Step 8. A piece of carpet has been supplied to protect the Velcro mounted lining. Place this piece of carpet on the floorpan inside the console’s storage bin.

Step 9. Re-fit the lining back inside the console.