Step
7. Connect the wiring to your radio(s) and accessories.
Coil up any excess wiring inside the pod. Place the pod onto the dashboard ensuring
that the mounting brackets line up with the holes that you have drilled.
Step 8. Open the "console fitting kit". Place the snap cap washers
under the heads of each self tapping screw.
Step 9. Screw both
mounting brackets onto the dashboard. Press the snap caps onto the snap cap washers
for a neat appearance.
Information
required when ordering:
1)
Are there any modifications to the vehicle that could prevent the console from
fitting correctly? If yes please supply the complete details. We will contact
you if the modifications will cause any problems.
2)
Which pod design do you require (see photos above). Please ensure that you select
the correct choice.
| Number
1 pod, standard height | |
Cost
- $290 |
| Number
1 pod, low rise | |
Cost
- $290 |
| Number
3 pod, standard height | |
Cost
- $330 |
| Number
3 pod, low rise | |
Cost
- $330 |
3)
Which vinyl colour would you like your pod upholstered in. Most of our customers
prefer to match the colour of the dashboard which is either tan or dark grey.
4)
Which options or accessories (if any) do you require in the console? Please provide
a sketch of the console indicating the type and position of each option
or accessory required. We have information on the measurements,
etc. for most radios, please tell us the brand and model of your radio(s)
and we will contact you if we need any other information. Please email your sketch
or fax it to the number below. If this is not possible, please phone us with the
details.
Phone
number - (00) (61) 2 95467914
Fax number - (00) (61) 2 95462469
Email - Click here
