Car Consoles & 4WD Storage Drawers - Department of the Interior - overhead consoles, roof consoles, custom built consoles, 4WD interiors, storage systems, vehicle consoles, radio console, dashboard pod, four wheel drive.

You are in Products -> Toyota -> Landcruiser 80 Series -> Cargo Storage Drawers (Does not fit Sahara)

The following information is specifically for the Toyota Landcruiser 80 Series. See Storage Drawers for Cargo Areas for detailed information on the features, prices, optional extras, and how our drawers are constructed so that they are stronger and lighter.

Why buy our drawers?
Stronger & Lighter Best Fit Best Finish Best Features Best Value for Money Manufactured in Australia	Easier to Install and Remove If required - custom built to your specifications Shortest Lead Time 3 Year Warranty

Above is an example of a single drawer unit which allows for the use of one third row passenger's seat. Single drawer units are available for the driver's side or the passenger's side. Another popular scenario is to fit a single drawer unit on one side and fit a fridge slide on the cargo floor next to the single drawer unit.
The options of a built in fridge slide, drawer partitions and "lift off" table are available for a single drawer unit.

Points of Interest:

Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
Designed individually to suit the Landcruiser, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
If required, a full Milford cargo barrier can be fitted in front of this system.
Fits to the vehicle without drilling any holes. If the vehicle had cargo seats the system utilises four seat mount captive nuts. If the vehicle did not have cargo seats we utilise the luggage tie down captive nuts.
A bed extension is also available for this model.

Full drawer system (two drawers "side by side") $2060 + options, half drawer system (one drawer) $1030 + options. The internal dimensions for each drawer are: 815mm(L) 458mm(W) 186mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)

FITTING INSTRUCTIONS:

Step 1. Remove the two cargo area seats, the seat mounts and the seat belts. Four of the seat mounting bolts will be utilised to mount the drawer system.

Step 2. To prevent exhaust fumes from entering the cabin replace six of the bolts into their captive nuts as indicated in the diagram.

Step 3. The top of this drawer system (the false floor) is in two sections. Unscrew each of these sections and remove them from the drawer units. If the drawer system has a built in fridge slide, only remove half of the false floor - i.e. remove the false floor on the opposite side to the fridge slide.

Step 4. Place the drawer units in the vehicle without the false floor and the side fillers attached. Align the mounting holes in the drawer units with the four "seat mount" captive nuts.

Step 5. Open the fitting kit. Join the two drawer units together using the six 35mm x 6 mm threaded screws, nuts and washers provided in the fitting kit - the holes are drilled. (If the drawer system has a built in fridge slide there are only five threaded screws. Three 30mm x 6mm and two 35mm x 6mm).

Step 6. Fix the drawer units into position using the four 40mm x 10mm threaded screws and washers provided in the fitting kit. Do not overtighten these threaded screws.

Step 7. Attach the two side fillers using the black panhead screws provided in the fitting kit.

Step 8. Place the false floor tops in position then screw them back onto the drawer units.