Points of Interest:

• Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
• Designed individually to suit the Hi Ace, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
• If required, a full Milford cargo barrier can be fitted in front of this system.
• We have templates to build a full drawer system (one or two drawers) that opens through the rear door and/or a single drawer that opens through the side door (see photos).
• Four holes must be drilled through the floor for the rear drawer system. An additional two holes must be drilled to fit the side opening drawer.
• The rear drawers have been designed to allow access to the bolt that holds the spare wheel in place.
• If required a lift off panel can be added to the top of the drawer system to allow access to the fuel sender unit under the cargo floor.

Full drawer system (two drawers "side by side" - rear door) $2700 + options.
The internal dimensions for each drawer are: 1650mm(L) 460mm(W) 226mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)

Single drawer system (one drawer - opens from side door) $1350 + options.
The internal dimensions for each drawer are: 1250mm(L) 825mm(W) 223mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer)