| |
 | 

|
Points
of Interest: Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
-
Designed
individually to suit the Hilux, neatly following the contours of the vehicle.
Our drawers are designed to utilise all the space available.
Our
drawer systems are not designed to be continually exposed to the weather, they
should only be fitted to a utility with a canopy or some permanent cover fitted. Four
holes need to be drilled through the tray to fit this drawer system. This
drawer system is designed to suit a Hilux without a tray liner.
Full
drawer system (two drawers "side
by side") $2900 + options
Half drawer system (one drawer) $1450 + options
The internal dimensions
for each drawer are: 2210mm(L) 450mm(W) 310mm(H) (These measurements
are for our standard size drawer system. The height of each drawer can be changed
to suit the customer) |
|