|
Low Profile Centre Roof Console from $390
Click
here for prices of accessories and options. These photos display two
of several variations on the centre roof console design available for this vehicle. Points
of Interest: - Robust construction -
Suitably durable for off road driving. Manufactured from steel and hardwood plywood
- NO PLASTIC.
- The shape of the base of the
console can be custom made to suit your radio(s) and other requirements.
- Radio
holes and storage openings etc. cut to suit your requirements
and accessories.
- Designed
for maximum headroom without interfering with the sunvisors or any other functions
of the vehicle.
- Upholstered in a vinyl or
velour finish.
- A vacuum formed finish is
also available for this roof console. This is a foam backed, heat shrunk, one wrap
(no seams) finish similar to the finish on the dashboard. Click
here for prices.
- The dual cab and extra
cab consoles fit the vehicle without drilling any holes by utilising the rear
view mirror and interior light mounting screw holes. The interior light then re-mounts
into a pre cut hole in the console. The single cab console utilises the screw
holes for the rear view mirror / interior light assembly at the front. To hold
the back of the console in position, three screw holes must be drilled into the
steel channel above the rear window. If the single cab console is removed from
the vehicle the three screws can be fitted back into these holes. Snap caps are
provided to cover the heads of the screws.
- Designed so the radio curly cords are out of view.
- We manufacture
our consoles in weekly batches. If we receive an order by Monday 5:30pm
Sydney time your console will be dispatched on the following Friday. The dispatch
date can vary if there is a public holiday.
- Professional
fitting service available.
Your centre
roof console will be designed to suit your specific model vehicle. It will neatly
follow the contours of your hoodlining and will be the ideal width to suit the
distance between your sunvisors. The length of the console takes into account
the mounting system for the console, the shape of the cabin and when applicable,
headroom for the rear seat passengers. When calculating the depth of the console
we allow for maximum headroom and a clear view for the rear vision mirror. As
no two model vehicles are the same our "vehicle specific" consoles are
the best available.
In
addition to being "vehicle specific" we also "custom build"
each console to suit your requirements - nobody else does that! We adjust
the shape of the base of the console to suit your radio(s) storage or lighting
requirements. When custom building your console we can build a slim line console
for maximum headroom or a deeper console for maximum storage. We can make the
console's radio housing(s) as small as your radio(s) will allow providing more
headroom and moving your radio(s) closer to the windscreen for better access.
Another advantage of this versatility of design, most modern radios have a LCD
(liquid crystal display) screen. It is easier to read the LCD when you are looking
square onto the screen. Whenever possible, we change the angle on the console's
facia panel to suit the radio being fitted. MICROPHONE
CURLY CORD RETAINER A
piece of "one wrap" hook and loop tape is supplied with each roof console
(one retainer for each radio) to prevent your microphone curly cord from dangling
and blocking your view. Simply screw this retainer onto the console in a suitable
position between the radio and the microphone clip, then wrap the tape around
the curly cord. If you need the full length of the curly cord, the "one wrap"
tape is easy to release and re-attach.
To
the left are some sketches to show you some of the possible variations
available for centre roof consoles. | 
