Points of interest:

• The "L" Tray is designed to neatly follow the contours of the floorpan.
• This console mounts onto the transmission tunnel fitting around the gear lever and transfer lever. The two open storage trays maximise the available storage space in this area.
• Robust construction - manufactured from 12mm plywood and steel mounting brackets. Upholstered in a padded vinyl finish.
• Available in a large range of colours. The most popular colours are Toyota chocolate brown, dark grey and tan.
  
• Installation is quick and easy - two holes must be drilled into the transmission tunnel for two mounting screws. Snap caps are provided to cover the heads of the screws.
• Suitable for vehicles fitted with two front bucket seats or a fixed passenger's side 3/4 bench seat. If the vehicle is fitted with a swivel 3/4 bench seat the floor tray will prevent the seat from turning.
• We manufacture our consoles in weekly batches. If we receive an order by Monday 5:30pm Sydney time your console will be dispatched on the following Friday. The dispatch date can vary if there is a public holiday.
• Professional fitting service available.

Fitting Instructions:

The "L" tray has two steel mounting brackets, one on each side of the tray. It comes complete with a fitting kit that contains two self tapping screws and three snap caps (one spare cap). The tray is fitted to the vehicle by drilling two holes into the vehicles floorpan in line with the holes in the two mounting brackets. The self tapping screws are then fitted inside these holes. The snap caps cover the heads of the self tapping screws. The mounting brackets and the snap cap match the colour of the "L" tray.

Information required when ordering:

Please note: This information is extremely important for us to be able to quickly complete your order. On the "checkout" page is a textbox for the information to be added.

1) Which vinyl colour you would like your "L" tray upholstered in? Most of our customers prefer to match the colour of the floor coverings which are either chocolate brown, tan, or dark grey.

2) There are two different positions for the gear lever, so there are two different shaped "L" trays. To supply the correct console, we need to know the distance from the back edge of the rubber gear lever boot to the embossed pattern in the rubber floor mat (see arrow on picture below)

Is this measurement approximately 80-85mm or is the measurement 20-25mm?

3) Are there any modifications to the vehicle that could prevent the console from fitting correctly? If yes, then please supply the complete details. We will contact you if the modifications will cause any problems.