Points of Interest:

• Our storage drawers have been designed to be as strong and as light as possible. This is achieved by constructing the drawers from marine bonded plywood then re-enforcing any areas that are highly stressed with steel components. Some parts are glued screwed and braced, other parts are riveted or bolted together. Click here for more information on the construction.
• Designed individually to suit the Prado, neatly following the contours of the vehicle. Our drawers are designed to utilise all the space available.
• Fits to the vehicle without drilling any holes by utilising the captive nuts in the cargo area.
• This drawer system does not interfere with child restraint points as they are fitted to the back of the seat.
• If required, a Milford cargo barrier can be fitted in front of this system.

Full drawer system (two drawers "side by side") $2220 + options, half drawer system (one drawer) $1110 + options.

The internal dimensions for each drawer without a cargo barrier: 845mm(L) 420mm(W) 216mm (H) (These measurements are for our standard size drawer system. The height of each drawer can be changed to suit the customer).

The internal measurements for each drawer if the vehicle has a Milford cargo barrier fitted: 742mm(L) 420mm(W) 216mm(H).