Dashboard Pod

The dashboard pod is a binnacle that sits on top of the dashboard and is ideal for mounting a radio, CB extension speaker etc. It is a small version of the instrument pod that houses the speedometer which comes standard in all vehicles. Our dash pods are finished in a vinyl that matches the dashboard crash pad. Most crash pads have a vacuum formed finish. Many of our dash pods are vacuum formed and are an exact colour and grain match.

Half Length Centre Floor Console

Available for all transmission types, cloumn shift, manual floor shift, and automatic floor shift. Suitable for bench or bucket seats. This design sits neatly under the dashboard and supplies as much flat facia as possible.

Full Length Centre Floor Console

Available for all transmission types, cloumn shift, manual floor shift, and automatic floor shift. Suitable for bucket seats only. This design supplies as much flat facia as possible. It comes complete with a storage bin and a hinged lid that forms a padded armrest. The storage bin is upholstered on the inside and includes a removable lining that is held in place by Velcro tape. This console is also available for vehicles with a handbrake between the bucket seats. The T-bar auto consoles are designed to house the genuine selector cover plate. The selector cover plate is not supplied with the console.

 Centre Floor Compartment

This console is the same as the back section of the full length centre floor console. Suitable for bucket seats only. It comes complete with a storage bin and a hinged lid that forms a padded armrest. The storage bin is upholstered on the inside and includes a removable lining that is held in place by Velcro tape. Centre compartments are also available for vehicles with a handbrake between the bucket seats. The photos show the most common designs of centre floor compartment (i.e. plain or with tray.) However, there are a large variety of individual designs for particular models. A radio can be mounted into most centre compartments inside the storage bin or in a separate facia panel. If we don't have a pattern for a centre compartment for your vehicle we can make one with a flat base by using your measurements. This only applies to vehicles without a handbrake between the seats.

 Seat Mounted Consoles and Desks

This console has a universal contoured shape so it will sit neatly onto most types of vehicle seat. The seat belt holds the console in place.

Across Windscreen Full Facia Roof Console

This console mounts across the vehicle above the windscreen. This design of console is only available for vehicles with vertical or near vertical windscreens which provide adequate headroom when the console is fitted. The facia panel which fits neatly to the roof, provides a strong support and will not vibrate when heavy radios are fitted. The full facia across screen console is designed to seal off the radio(s) and/or storage area(s), keeping out most of the red dust. All Storage/Access Openings (S.A.O) come complete with an elasticised vinyl flap. This vinyl flap keeps most of the red dust out of the storage area and also keeps any stored items in place. The facia layout is optional, the Storage/Access Opening(s) and radio(s) can be positioned to suit your requirements.

Across Windscreen Shelf Roof Console

This console mounts across the vehicle above the windscreen. This design of console is only available for vehicles with vertical or near vertical windscreens, which provide adequate headroom when the console is fitted. The base of this console is the same as the full facia design. It does not have a facia panel that fits up to the roof, but rather a lip that holds stored items in position. This console can collect the red dust, it is not as strong as the full facia design and on rough roads some vibration can occur if heavy radios are fitted. Also, stored items can bounce off the shelf on rough roads. The advantages are, the ease of mounting radios, there is no need to cut holes and radios can be repositioned easily. Also, there are considerable cost savings in comparison to the full facia design because there is no need for radio holes or Storage/Access Opening.

 Rear Roof Console

This console mounts across the vehicle above the rear barn doors or tailgate in a station wagon, troopcarrier etc. The rear roof console is ideal for mounting large speakers securely and out of harms way. The facia panel is angled so the speakers face the passengers. When mounted in this console the speakers are as far away from the passengers as possible, and are as far apart as possible to produce the optimum sound. This console is also useful as a storage area, and for mounting a fluorescent light.

 "T" Shaped Roof Console

This console has the advantages of the wide style centre roof console and the across windscreen roof console combined. As its name indicates the console is a "T" shape, providing the maximum area for storage and radio mounting etc.

Wide Style Centre Roof Console

The wide style roof console is designed for vehicles with limited head room in front of the driver, although providing adequate head room in the centre of the roof. All centre roof consoles are positioned at a 90 degree angle to the windscreen (i.e. they sit in the centre of the roof). This console can be used for overhead storage, and is wide enough to accommodate the longest radio. Any radios etc. mounted in this console must face sideways, to the driver or to the passenger. Most wide style roof consoles come complete with a storage/access opening (SAO) with an elasticised vinyl flap on the passenger's side of the console.

Deep Profile Centre Roof Console

All centre roof consoles are positioned at a 90 degree angle to the windscreen (i.e they sit in the centre of the roof). This console is narrower, (normally the same width as the distance between the sun visors) but the same depth as the wide style roof console. The deep profile roof console has all the advantages of the low profile console. However the deep profile console provides additional space at the rear, for a larger second radio and/or a Storage/Access Opening (S.A.O). The Storage Access Opening with elasticised vinyl flap is optional on the deep profile roof console (see photo 2). Some vehicles do not provide enough head room for a deep profile roof console. Deep profile consoles can be manufactured with a flat base and an open facia. The open facia can be provided on the driver's side, the passenger's side or on both sides. The open facia provides access to a carpeted storage area. Radios or remote heads can be mounted in the facia opening without cutting any holes.

Low Profile Centre Roof Console

All centre roof consoles are positioned at a 90 degree angle to the windscreen (i.e. they sit in the centre of the roof). The low profile console is designed for vehicles with limited head room in all directions. This console is narrower, (normally the same width as the distance between the sunvisors.) and less obtrusive than the wide style roof console. However we can position a large C.B above the rear vision mirror and close to the windscreen. This radio can be seen by all occupants of the vehicle. Also in most cases, if required, we can slightly deepen the rear section of the console to accommodate a second radio facing sideways, or to provide some storage space. (NOTE: we need to know the size of the second radio to build this console, in some cases a deep profile console may be necessary. We also recommend that we cut the radio hole before upholstering the console. Low profile consoles can be manufactured with a flat base and an open facia. The facia can be provided on the driver's side, the passenger's side or on both sides. The open facia provides access to a carpeted storage area. Radios or remote heads can be mounted in the facia without cutting any holes).