Floor Console Wiring Loom

Compatibility

• 2009 - 2014 Models: Engine Bay Loom
• 2014 - 2023 Models: Plug & Play
• 2023/2024 Facelift Models: Engine Bay Loom
• Not compatible with earlier versions.

Product Description

2014 - 2023 ( Pre Facelift ) Models: Plug & Play

This innovative wiring loom connects seamlessly to the white plug previously used for the factory 12V ACC socket located in the factory drink holder assembly. The spade terminals with blue insulation attach directly to the terminals on the back of the supplied Narva 81144 (12V ACC and Dual USB) outlets, which are designed for installation in the console.

By utilizing this setup, installation time is significantly reduced since there's no need for cutting, extending wiring, or adding terminals to the factory wiring. This loom supports either one or two outlets (e.g., Narva 81134 or Narva 81134) situated solely on the front accessory fascia.

Note: This loom is suitable for a maximum of 2 sockets only at the front accessory fascia of the console. It is not designed for more than 2 sockets or for sockets placed elsewhere in the console.

2009 to 2014 & 2023/2024 Facelift Models Onwards: Engine Bay Loom

The length of the positive wire in this loom allows it to reach the factory fuse panel located in the engine bay. The grounding point connects to the airbag sensor module's front mounting bolt for optimal safety and functionality.

Additional Notes

• The wiring loom accommodates two outlets (e.g., one 12V ACC and one Dual USB, or two 12V ACC).
• Outlets must be installed side-by-side, maintaining the same spacing as demonstrated in our Full Length Console with USB & 12V design.
• For customers purchasing a Premium Full Length Console with 4 outlets, two looms can be purchased and used, as they will be fused separately.
• The loom is designed long enough to reach outlets installed on the rear accessory fascia (the 'elbow fascia'), with the ground connected to the mounting point under the cup holder.
• The existing plug-and-play looms are compatible only with vehicles that had a charging outlet in the factory cup holder. This new loom is suitable for customers with more than one pair of sockets in their floor console.
• The factory fuse panel used is standard in all 70 Series models from 2009 onward.
• The terminals needed to connect the positive wire to the factory fuse box are located in the glovebox. Customers will need to strip the insulation off the end of the positive wire and crimp the terminal for connection.

With both the Plug-and-Play Loom and Engine Bay Loom options available, installation versatility has reached new heights!

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.