Original Floor Console - Charging Sockets and (5) Rocker Switch Panel | TroopCarrier
We're closed from 23 December to 11 January. Orders will be processed when we return, so please allow an extra 12 business days on top of the lead time above.
RecommendedFloor Console Wiring Kit- LC70
Everything to wire your 12V sockets to the factory accessory fuse panel.
+$40.00
Black Duck Lid Cover - CanvasHeavy-duty canvas cover. Water and UV resistant.+$110.00
Velcro Door with Internal Carpet LiningHidden storage under the lid behind a Velcro door.+$90.00
Quad Lock Wireless Charger- Console MountAdjustable wireless charging mount. 10 min install.+$99.99
Drop In TrayRemovable tray to organise the deep storage bin.+$50.00
Ripstop Canvas Storage liningCanvas lining with sewn-in pockets for small items.+$85.00
Premium Floor Consoles Accessories KitTray, lid cover, jumbo disks and Big Caddy adaptor.+$175.00
Floor Consoles Essentials Accessories KitTray, canvas lid cover and jumbo disks in one kit.+$140.00
Big Caddy Drink Holder AdapterFits bottles up to 97mm wide in your cup holder.+$35.00
Jumbo Cup Holder Disks ( Pair )Levels the jumbo holder’s top tier for larger drinks.+$5.00
Original floor console
Choose your layout
LandCruiser 78 Troop Carrier · every layout is the same console, just a different switch and socket panel.
-

Layout sketch
Blank (no cut-outs)
From $1,505
-

Layout sketch
2 sockets (12V + Dual USB A&C)
From $1,565
-

Layout sketch
Scan Gauge II + 4 rocker switches
From $1,565
-

Layout sketch
2 sockets + Airbag Man
From $1,595
-

Layout sketch
3 sockets (12V / USB / RJ45 options)
From $1,595
-

Layout sketch
Dual USB + 7 rocker switches
From $1,585
-

Layout sketch
3 sockets (12V, USB, RJ45) + 4 rocker switches
From $1,665
-

Layout sketchSelected
2 sockets + 5 rocker switches
$1,615
-

Layout sketch
2 sockets + Scan Gauge III
From $1,595
No layout has all of those features. or ask us about a custom panel.
Photos marked Illustration show the base console, not the final layout. Switch to Layout sketches to see each panel.
Layout sketches show each panel. Switch to Photos to see the finished console. Photos marked Illustration show the base console, not the final layout.
Upgrade option
Want to upgrade to Premium?
Every Original layout is also made as a Premium console. Same layout: 2 sockets + 5 rocker switches.
Original
Premium
From the Standard Inclusions on our Original and Premium listings.
Original · viewing
Original Floor Console - Charging Sockets and (5) Rocker Switch Panel | TroopCarrier
$1,615
View this one
Premium · 78 Troop Carrier
Premium Floor Console - Charging Sockets & (5) Rocker Switch Panel | TroopCarrier
From $2,095(+$480)
View Premium
Standard Accessories (included with all Original Full Length Consoles):
- Two jumbo cup holders, featuring two tiers for versatility
- Removable L shape storage tray * UNLESS MODIFIED SHAPE *
- Manual gear boot
- Padded storage lid with a storage compartment under the lid
- Installation hardware
- Clear and precise installation instructions
Here are the options for this specific listing:
- Narva 12v & Dual USB Twin Socket: Positioned at the front, passenger side. (View this product on the Narva website here)
- Rocker Switch Panel (5) with Blanking Plates: Positioned at the front, driver side above the gear stick.
Troopy Modifications:
On TroopCarrier models with rear seats, the standard Full Length Floor Console reduces the front passenger seat’s forward travel by approximately 30–40%. This can make access to the rear bench more difficult than factory.
Modification Option:
We can alter the front shape of the console to allow approximately 90% seat extension (100% is not achievable).
This modification changes the layout from two cup holders and an L-tray to two cup holders and a smaller square pocket. The front accessory fascia remains unchanged.
Additional cost: $240
If rear access via the passenger seat is not required, the console can be supplied without modification.
Points of Interest
- French seam upholsteryour consoles are fully upholstered by our skilled team, just as we've been doing since 1975.
- Built toughconstructed with exterior grade, marine bonded plywood for durability.
- Easy to cleanremovable ABS plastic cup holders and L shape storage tray make cleaning a breeze.
- Colour matchedour exclusive DeluxeTrim range of vinyl is custom made to match the 70 Series interior.
- No rattlesABS plastic components with removable carpet eliminates noise from coins, cans, or metal mugs.
- Easy to fitgalvanised steel mounting brackets use existing captive nuts in the floor - no drilling required.
- Comfortable armrest heightcheck the product dimensions for the height of the padded lid.
Specifications
| Material | Constructed with exterior grade, marine bonded plywood for durability. |
|---|---|
| Vinyl with French seam upholstery | |
| ABS plastic components | |
| Galvanised steel mounting brackets | |
| Height | 494mm (incl. armrest/ padded lid) * 79DC / 76 Wagon |
| 380mm (incl. armrest/ padded lid) * 79 SC / 78 Troopy | |
| Width between seats | 190mm |
| Length | 980mm |
| Manufactured by | DOTI Automotive, Australia (est. 1975) |
Pre-AEB, AEB or Facelift?
- Pre-AEB 2009–2022
- Small guard indicator, no radar (mirror only).
- AEB 2022–2023
- Large guard indicator, radar and mirror, old-style headlights.
- Facelift 2023/24 onwards
- Large front guard indicator separate to the headlight, new headlight style, new radar and mirror assembly, factory TOYOTA badge, factory steering wheel controls.
Ask us about this product
Send us your question and our team will get back to you.
Original Floor Console - Charging Sockets and (5) Rocker Switch Panel | TroopCarrier


















