
Speakers, Door Pods & Trims – Frequently Asked Questions
Colour Matching
Q: Can you make this product to match the tan/brown interior colour
Yes. We have a tan vinyl that matches the 70 Series door trim colour. Contact us on (02) 9546 7914 or email sales@consoles.com.au to place an order.
Q: Does the colour match the factory trim?
A: Yes. Our deluxe vinyl is custom-made to match the door trims, armrests, door handles, and seat plastics.
Speaker Fitment
Q: What speakers fit?
A: Our Original and Premium Speaker Door Pods suit all 6.5" speakers. For a no-cut fit, select from one of our recommended speaker models.
If you choose another brand/model, you may need to cut the steel door frame to allow for the speaker magnet depth and diameter. If so, the installer must:
- Vacuum and wash out the door frame to remove steel shavings
- Paint the exposed edge
- Apply rust-proofing inside the door frame
Door Pocket Options
Q: What door pocket options are available?
A: Factory Pockets: If your GX/GXL model has factory plastic pockets, we can cut provisions for you to re-fit them (no extra cost).
Factory Toyota Pockets: $110 per pair if your vehicle doesn’t have them.
Aftermarket 70 Series Door Pockets: $180 per pair
Mounting & Installation
Q: How are the pods secured?
A: They are securely mounted with no visible fasteners. See our instructions here
Check your stereo can power your speakers – consider an amp if needed.
Many customers disconnect the 4" dash speakers and use them for UHF output.
Run speaker cabling before installing pods.
Use plastic trim removal tools to avoid damaging parts.
Install sound deadening in the steel door frame.
Apply rust protection (fish oil or similar) inside the frame.
Sound Deadening
Q: How should I install sound deadening?
A: Wipe surface with wax/grease remover
Cut into strips to fit through access holes
Cover as much steel as possible for the best results
Apply rust-proofing inside the door frame
Tweeter Options
We recommend Tweeter Pillar Pods from Everything 4WD, painted to match the factory pillars, for optimal sound staging.
Alternatively, we can supply a mounting plate to replace the 4" dash speaker location.
Why We Don’t Offer 6x9" Speaker Holes
Fitting 6x9" speakers requires cutting the 70 Series door frame, which:
Involves messy steel removal and rust-proofing
Weakens the door frame
Is unnecessary for great sound quality
From an audio perspective, 6x9s distort more and reduce clarity. Component speakers (6.5") provide better staging and sound reproduction without cutting.
ABS Plastic Door Trims
Our ABS plastic trims are:
Waterproof – unlike factory masonite trims which rot or mould with moisture
Durable – same plastic as the dashboard
Pre-installed Option – When purchased with our Original or Premium Speaker Door Pods, we pre-install the pods for you so installation is as simple as:
Remove your factory trims
Swap the armrest
Clip in your new trims and reinstall screws/latch
